EnGenius SP-935 User Manual page 9

available lines before making an outgoing call.(1 for telephone line, 5 for
SIP call)
b-3 Off: Disable the capability to make an outgoing call.
c. Call Barring
c-1. Block the users from dialing long distance calls or international calls
c-2. Up to 5 digits of each call barring setting; up to 5 entries allowed
d. This changing requires to entering the "Call Settings" (MENU-4-3-4).
[Note] You need to key in the accurate user ID and password to perform this
feature. The default password is "0000".
9. Any Key Answer (except and
a If you enable Any Key Answer, while you have two incoming line calls
simultaneously, you can press
answer the line 2 call.
10. Key-guard
a. When the keyguard is selected, all keys will be locked.
Press UNLOCK (Left) soft key followed by
b. The keyguard will be automatically enabled once returning back to idle
mode for 15 seconds.
11. Dialing Prefix
a. Up to 14 digits, including pause(s), one access code can be pre-
programmed to be added automatically in front of the dialed number
when dialing from call logs, phonebook, and dial-and-send dialing.
12. Call Hold
a. Places call on hold
13. Mute
a. Press MUTE (Left) soft key during talk, the handset microphone will be
muted.
Press UNMUTE (Left) soft key to release it.
14. Phonebook
a. 50 entries, each stores a phone number or handset ID (up to 26 digits) and
name (up to16 characters)
b. Alphabetically sorted display and search by letter.
SILENT soft Key)
1 to answer the line 1 call or press 2
＊
to release it.
~17~
c. Dial from display.
d. During the stand-by mode, you can enter the phone book by pressing
e. Phone book transfer via air
i. Transfer specific phonebook to one handset or all registered handsets
ii. Transfer all phonebooks to one handset or all registered handsets
15. Key tone
a. Four-level key tone volume selections (Off/Low/Medium/High).
b. Four key tone type selections.
16. Call Timers
a. Display call time duration for current call during and immediately after the
call.
17. Programmable Feature Call
a. Allow user to pre-program the most frequently used Feature code into SP-
935 which is adjunct to the PBX system.
to
b. Up to 10 entries can be saved.
c. Once the feature code is being programmed, you can quickly perform
those functions during the call by pressing
18. Menu Display
a. To avoid mis-setup in the "Call Settings"(MENU-4), "Phone Settings"
(MENU-5), "Base Settings" (MENU-6) and, these settings can be hidden.
b. Handset password is required before enter Menu Display (MENU-8), the
default handset password is "0000".
c. When disabling the settings, these setting will not displayed any longer,
unless enabled by entering Menu Display again.
19. PA On/Off
a. Enable or disable the broadcast function.
b. When PA is Off, the handset can't receive broadcast from base station or
other registered handsets; But it can broadcast to base station or other
registered handsets.
20. Group Setting
a. Allow handset to subscribe to one or several groups.
Re: Up to 7 groups (1~7) can be subscribed.
21. Custom Name
scrolling key.
OPTION
~18~
soft key.