EnGenius SP-935 User Manual page 31

1. Press MENU right soft key to enter menu mode while the phone is in standby
mode.
Re: You can either press or
confirm the selected menu. Or Press the digit directly to confirm the
selected menu. For example, press
1 to select the Ring Volume.
2. Press 1 to select Keyguard (see Key Guard operation on page 34 ).
3. Press 2 to add, delete, edit, view and edit the phonebook (see Phonebook
instruction on page 40 ).
4. Press 3 to set Sounds settings:
a. Press 1 to select Ring Volume:
Two options for ring volume: Line (for incoming call) and Intercom (for
intercom call). Set each option respectively.
When setting each option, use
"Off", "Low", "Medium", "High", "Vibrate" and "Vibrate & High". Press
SELECT left soft key to save selection. Default = Medium.
b. Press 2 to select Ring Tone:
Two options for ring tone: Line (ring tone for incoming call) and Intercom
(ringer for intercom call). Set each option respectively.
Use the or to scroll through 8 ringers, press
key to save selection. Default = 1.
c. Press 3 to select Key Volume when a key is pressed:
Use or to scroll through 4 options: Off, Low, Medium, and
High. Press SELECT left soft key to save selection. Default = Medium.
d. Press 4 to select Key Tone:
Use the or to scroll through 4 options: 1, 2, 3 and 4. Press
SELECT left soft key to save selection. Default = 1.
5. Press 4 to set Call Settings:
a. Press 1 to set Dial Prefix:
(1)
Press or
, followed by SELECT left soft key to
MENU right soft key followed by
or to scroll through 6 options:
SELECT left soft
to turn on or off the dial prefix feature. Default
~61~
(2)
(3)
(4)
4 and
(5)
(6)
b. Press
c. Press
d. Press
6. Press 5
a. Press
b. Press
Use
Default is "Off".
Re: When set "on", press any key (except
c. Press
(1)
(2)
d. Press
(1)
(2)
e. Press
(1)
= Off.
If "On" is selected, the handset is prompted to enter the prefix
number, up to 14 digits can be entered.
Use Delete right soft key to edit prefix number.
Press SAVE left soft key to confirm the selection.
When this feature is turned on, the LCD will prompt the user "Dial
Prefix? Yes or No" on each outgoing phone call from call logs,
phonebook, and dial-and-send dialing, the current prefix is also
displayed.
Re: the prefix number will be added automatically in front of the
dialed number if press YES left soft key.
This feature is useful for access code, calling card, and credit card
calls, etc.
2 to Group Select: see Handset Group Subscription on page 37 .
3 to set Call Manager: see Call Manager operation on Page 48.
4 to set Feature Call: see Feature Call operation on Page 44.
to set Phone Settings:
1 to set Mic Gain: See Mic Gain operation on Page 52.
2 to set Any Key TALK:
CHANGE left soft key to select and confirm "On" or "Off".
the incoming call.
3 to set LCD Contrast:
Use or to scroll through option 1~8. Default is 4.
Press SAVE left soft key to confirm selection.
4 to set LCD Backlight:
Use or to scroll through option 1~3 (1.8 seconds 2.On
3.Off ). Default is "8 seconds".
Press SAVE left soft key to confirm selection.
5 to set Name Tag:
Use CHANGE left soft key to select and confirm "On" or "Off". Default is
"Off".
~62~
and SILENT key) to answer