Charger Illustration - EnGenius SP-935 User Manual

Charger Illustration

DC In
Spare Battery Charging
Slot
Spare Battery Charging
Indicator
Handset Charging Slot
~23~
Charger Features
1. DC In
Connects to Charger AC Adaptor.
2. Handset Charging Slot
a. Charge handset battery when handset is placed in cradle.
b. Refer to the handset LCD for charging status
(1) Charging: battery status bar is running and the LCD screen showed:
"Charging".
(2) Fully Charged: battery status bar stands still and the LCD screen would display
"Charge Complete"
(3) Charge Fail: Should there be any error occurred during charging mode, the
LCD screen would display "Charge Fail"
3. It is impossible to overcharge the battery using this charger.
4. The adaptor for charging station can be used as travel charger as well.
However, you can't turn off the power while you charge the handset via travel
charger. A warning message" "Unplug Travel Charger then OFF" will be shown
on the LCD.
Notes:
1. Fully charge battery packs before first use.
2. Handset will be "power on" automatically when placing on the
charging slot.
3. However, if you run drain the battery, it will take around one minute
for handset to auto power on.
~24~