Caller Id - EnGenius SP-935 User Manual

record will have a "NEW" at the end of the first line of display.
3. When viewing a call record, the number can be dialed, stored to the phonebook or
deleted.
View Call Log
1. To view the call log, press
to enter the Call Log.
Press or key to scroll through the numbers and
names when available.
2. Press
OPTION right soft key, you can
choose save, delete, clear all.
a. Save call log:
(1) Press
SELECT right soft key, you can use
key to scrool the name, and press
edit the name.
Then press SAVE left soft key to save the name.
(2) Use
or key to scrool the number, and
press DELETE to edit the number.
Then press SAVE left soft key to save the number.
(3) After above process, the call log saved into
phonebook.
b. Delete call log:
(1) Press SELECT right soft key followed by
key to confirm deleting.
c. Clear All:
(1) Press SELECT right soft key followed by
key to confirm clearing all caller ID records.
Call a Caller ID
1. Press
key on idle screen to enter the call log, use
key to scrool the call log.
or key to
or
DELETE to
YES left soft
YES left soft
or
~45~
2.
When display a caller ID, Press
Call Manager
"Call Manager" feature allows four options：
1. The first option is "Incoming". The handset can be selected to enable receiving
the incoming PA, intercom call, line call or line dedicated.
2. The second option is "Outgoing". The handset can be set to access available
bases automatically or manually or pre-defined telephone line.
3. The third option is "Call Barring". The handset can be selected to block the calls
which are not allowed.
Note: When enter this menu (Call Manager), you must enter handset's password
first (4 digits). The default password of handset is "0000".
Incoming
1. Press MENU (Right) soft key followed by
the Call Settings mode.
Press 3 to select Call Manager followed by entering
handset's password (4 digits).
Press 1 or 2 if muti-base is on to select Incoming.
a. Press 1 to enable receiving PA On/Off.
Re：Default setting is "ON".
. b. Press 2 to enable receiving Line On/Off wich include
SIP and FXO line both.
Re：Default setting is "ON".
c. Press 3 to enable receiving Intercom On/Off.
Re：Default setting is "ON".
(1) By default all incoming calls will ring all handsets.
to dial this number.
4 to enter
~46~