Redial - EnGenius SP-935 User Manual

the voice.
Re: the initiating handset press and hold the
during the speaking or broadcasting.
c. Release
key to end the broadcasting.
3. Broadcasting an individual handset
a. Enter the Handset ID and then press and hold
key.
b. Start to speak the message to be broadcasted once you hear the key tone;
the speakerphone of destination handsets will be opened up, if it received
the voice.
Re: the initiating handset press and hold the
during the speaking or broadcasting
c. Release
key to end the broadcasting.

Redial

1. Press REDIAL (Left) soft key.
2. The LCD shows the last phone number dialed. To dial this
number, press key.
3.
Use or key to scroll through the last 10 phone
numbers dialed. Select and press
selected number.
[Note] Intercom numbers (Handset ID) are not stored in the
last 10 numbers dialed log.
Receiving a Telephone Call
1. When an incoming call arrives, the LCD will show the caller
ID message, and the ringer will ring or vibrate unless the
key is needed
key is needed
key to dial the
~31~
ringer has been turned off.
2. If the handset is on the charger cradle (ringer will be
temporarily switched to "Ring" if it has been set to
"Vibrate"), lift the handset and press
conversation.
Re: You can turn on the "Any Key Talk" from MENU-5-2
Notes:
1. You can press SILENT (Left) soft key if you choose to ignore the call.
Unlike turning off the ringer (from the handset menu), the
key operation is valid only for the current call.
2. If Caller ID service is available, the LCD will display the incoming call
information. If the LCD shows "Private" or "Unknown", the caller's
information may have been blocked by the caller or the originating
phone company.
Receiving an Intercom Call
1. When an intercom call arrives (called from other handsets,
ex. Handset 12), the ringer will ring or vibrate unless the
ringer has been turned off. Press
intercom call.
2. If the handset is on the charger cradle (ringer will be
temporarily switched to "Ring" if it has been set to
"Vibrate"), lift the handset and press
conversation.
3. If the handset is not on the cradle and MENU-6-2 "Any Key Talk" setting is "On",
press any key (except and the
Notes:
1. The LCD displays the caller's Handset ID.
2. You can press the SILENT (Left) soft key if you choose to ignore the call.
key to start
SILENT
to answer the
key to start
SILENT soft key) to answer.
~32~