Ending A Call - EnGenius SP-935 User Manual

Unlike turning off the ringer the
the current call.

Ending a Call

To end a telephone or intercom call, press
cradle.
Adjusting Handset Receiver (Earpiece) Voice Volume
1. Voice volume can only be adjusted during a call.
2. There are 6 levels of volume selections. Use
key to adjust
3. The new setting remains effective for all future calls until
changed.
Adjusting Handset Speakerphone Voice Volume
1. Voice volume can only be adjusted during a call (in
speakerphone mode).
2. There are 6 levels of volume selections. Use
key to adjust
3. The new setting remains effective for all future calls until
changed.
Placing a Call On Hold
1. When a call is in progress, it can be put on hold by pressing
＊
OPTION (Right ) soft key and the
SILENT key operation is valid only for
key, or place handset into charger
or
or
key
~33~
2. To return to the conversation, press
Notes:
1. Handset LCD displays a call is being on hold. An alert tone (double
beep) every 30 seconds will remind the handset that a call is being on
hold.
2. If the operation (e.g., call transfer) after putting a call on-hold fails,
the held call may be dropped.
Mute
1. After a link is established, you can press
key to mute the handset microphone.
2. When mute is active, the other end will not hear your
voice, but still can speak to you.
3. To leave the mute state, press UNMUTE
for the current call.
Do Not Disturb (Silent Ring)
1. Enter the key sequence MENU-3-1, then select "Off". Press
SELECT (Left) soft key to confirm your choice. This will turn
off the ringer until it is turn on again from the menu.
2. For temporary silencing the ringer when an incoming call
arrives, press SILENT (Left) soft key.
Key Guard
1. To prevent accidental dialing, you can press
soft key, then press"1" to select Keyguard option. The
handset keypad is locked. No key entry is accepted.
2. To unlock the keypad, press UNLOCK
UNHOLD (Left) soft key
MUTE (Left) soft
(Left) soft key. Mute is effective only
MENU (Right)
(Left) soft key, then,
~34~