Glowforge Manual page 9

The included CO2 laser has the following characteristics:
● Wavelength: 10.6 µm continuous wave (CW)
● Internal laser power: less than 100 watts peak
● Beam diameter: less than 5mm at aperture
● Beam divergence: less than 1.2mrad
The included laser diode has the following characteristics:
● Wavelength: 635nm - 650nm CW
● Internal laser power: less than 0.39 milliwatts peak
The Glowforge unit is manufactured by:
Glowforge
2200 1st Avenue South, First Floor
Seattle, WA 98134
For more information or support, contact ​
The following label information applies to the Glowforge Basic
Copyright Glowforge, Inc. 2017
DRAFT
s upport@glowforge.com