Glowforge Manual page 17

4. Have two people lift the Glowforge unit out
of the box
5. Leave a Little Room
a. Place the unit with at least an inch
of clear space in all directions. Do
not block the air intake on the bottom right side of the Glowforge unit.
6. Confirm Safety Equipment Confirm that your safety equipment meets requirements: See
Fire Safety, Smoke and Fume Safety.
Remove Printer Head, Power Cord, and Important Orange and Red Bits
We've secured your Glowforge with two foam blocks and several important orange and red bits.
In addition to providing support during travel, the rear foam block also holds your Printer Head
and power cord.
1. Lift the lid of your Glowforge & lower the front door
2. Remove the Front Foam Block
a. Gently pull out the foam closest to
the lowered front door
Copyright Glowforge, Inc. 2017
DRAFT