Glowforge Manual page 31

Service
The Glowforge unit may not be serviced or repaired by the user. Should service or repair be
required, it must be returned to the factory; contact ​
Moving Your Glowforge
Moving to a new Wi-Fi network
1. Using a device that connects to the internet via
Wi-Fi, go to ​
a pp.glowforge.com/setup​
2. Turn on your Glowforge and wait until all motion
has stopped for 30 seconds.
3. Hold down the button on your Glowforge for ten
seconds, until it glows with a teal color.
4. Follow the instructions on screen to connect your
Glowforge to Wi-FI.
Packaging Your Glowforge
Whether it's for a big move, taking your Glowforge to an event, or for any warranty repair, you'll
need to package your Glowforge properly with the original boxes, foam blocks, and important
orange and red bits. The box is specially designed to protect your Glowforge through all
shipments, domestic and international. Should you need to purchase a replacement shipping
box for $199, contact ​ s upport@glowforge.com​
Power Off and Unplug Your Glowforge
Always turn your Glowforge off before packaging any part of your unit. Unplug your unit and set
the power cord aside.
Remove the Printer Head
1. Position the Laser Arm
a. Gently push the laser arm to the back of the Glowforge
Copyright Glowforge, Inc. 2017
DRAFT
s upport@glowforge.com​
and sign in.
.
for instructions.