Glowforge Manual page 11

DRAFT
Unboxing & Setting Up
Let's Get Started
If you've read about Safety, you now know everything you need to operate your
Glowforge safely, and that's pretty cool. Thank you for your patience. Now, it's time to
get lasering!
Unboxing shouldn't take too long – we can't wait for you to get started with your first
print, either. In just a few minutes, you're going to have a working laser in your home (or
office, classroom, workshop, or design studio)! Of course, if you encounter any
challenges along the way, our Customer Success team can be reached at
support@glowforge.com​ .
Before you start, be sure you have a flathead screwdriver and a stable surface on
which to place your Glowforge where you'll have nearby access to an electrical outlet
and exhaust vent.
Let's get started, shall we?
Any damage?
If your packaging or any part of your Glowforge shipment is visibly damaged on arrival, we want
to make it right as soon as possible! Send photos of the damage to support@glowforge.com
and wait until you hear back from us. If the Glowforge itself is visibly damaged, do not plug it in
or attempt to operate us; contact us immediately.
Copyright Glowforge, Inc. 2017