Glowforge Manual page 24

The unit's button will glow teal. Your Glowforge is on!
Sign in and connect your Glowforge to Wi-Fi
1. Get Ready
a. Find a device that uses Wi-Fi to access the internet, like a laptop computer. Go
to ​ c ommunity.glowforge.com​
2. Begin Setup
a. To begin setup, go to
app.glowforge.com/setup
3. Sign In
a. Your username is the email you used
when placing your order. If you have not
used your Glowforge account at all yet,
you can set up your password by
clicking "Forgot password?" You'll
receive an email to help you create or
reset your password.
4. Enable Airplane Mode
a. If you are using a phone or other device
that can access the internet through the cellular network, put it in airplane mode.
Otherwise, it will use the cellular network, and won't communicate with your
Glowforge in the next step.
5. Connect to Your Glowforge Unit's Wi-Fi
a. Your Glowforge is now broadcasting a special Wi-Fi channel so you can connect
to it and finish setting it up. Follow the instructions on screen to connect to your
Glowforge unit's Wi-Fi. You will not be able to access the internet again until you
either finish, or stop and reconnect to your usual Wi-Fi network. When you
Copyright Glowforge, Inc. 2017
DRAFT
and make sure the page loads correctly.