Glowforge Manual page 30

6. Wipe the window on the left side of the head.
7. Carefully reach over the left rail and wipe the laser
window on the left side of the bed.
8. Finally, gently wipe the lens of the wide angle camera on the
unit's lid.
9. It's normal for some dust to accumulate inside your Glowforge. It is not necessary, but
you can wipe the laser tube or the inside of the case with additional ZEISS cleaning
wipes. Allow any moisture to dry completely before turning on your Glowforge again.
Copyright Glowforge, Inc. 2017
DRAFT