Clean The Glass Lens - ETC Irideon FPZ User Manual

Clean the Glass Lens

WARNING:
1: Remove the integrated media holder.
2: Use a Phillips screwdriver to remove the three screws from the front of
the fixture.
3: Remove the front casting and the metal shaft.
4: Remove the light block bracket.
5: Remove the lens adjustment knobs.
6: Remove the front and rear lens holders.
7: Remove dust with a blast of oil-free air or wipe with a clean, lint-free
cloth. Isopropyl alcohol, distilled water, or a 50%-50% mixture of each
can be used to clean the glass surface.
8: Replace the lens.
Front
casting
22
Do not use ammonia-based or other harsh commercial
cleaners. Clean lens only as directed.
Commercially available glass cleaning agents should be
avoided as they may contain ammonia, other harsh
chemical detergents, or abrasive agents. These cleaners
may damage the glass surface and the Anti-Reflective
coatings. Do not immerse or soak the glass in any
cleaning solution.
Rear
lens
Front
lens
Metal
shaft
Three screws
Integrated
media holder
Light block
bracket
Lens adjustment
knobs
FPZ