Card Reader Board Cable - HP Spectre x360 13 Maintenance And Service Manual

Card reader board cable

Description
Card reader board cable (includes double-sided adhesive)
Before removing the card reader board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the card reader board cable:
1. Release the ZIF connector (1) to which the card reader board cable is connected, and then disconnect
the card reader board cable from the system board.
2. Release the ZIF connector (2) to which the card reader board cable is connected, and then disconnect
the card reader board cable from the card reader board.
3. Detach the card reader board cable (3) from the keyboard/top cover. (The card reader board cable is
attached to the keyboard/top cover with double-sided adhesive.)
4. Remove the card reader board cable.
Reverse this procedure to install the card reader board cable.
Bottom cover on page
Battery on page 31).
29).
Component replacement procedures
Spare part number
942830-001
49