Fans - HP Spectre x360 13 Maintenance And Service Manual

Fans

Description
Left fan (includes cable)
Right fan (includes cable)
Before removing the fans, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the right fan:
1. Release the system board shielding (1) that covers the infrared sensor board cable and connector.
2. Release the webcam/microphone module cable (2) from the retention clip built into the right fan.
3. Disconnect the right fan cable (3) from the system board.
4. Release the zero insertion force (ZIF) connector (4) to which infrared sensor board cable is connected, and
then disconnect the infrared sensor board cable from the system board.
5. Detach the infrared sensor board cable (5) from the system board. (The infrared sensor board cable is
attached to the system board with double-sided adhesive.)
6. Remove the Phillips M2.0×5.2 screw (6) and the Phillips M2.0×2.8 screw (7) that secure the right fan to
the keyboard/top cover.
Bottom cover on page 29).
Battery on page 31).
Component replacement procedures
Spare part number
942843-001
942842-001
35