Figures - Keysight Technologies InfiniiVision 2000 Service Manual

Figures

Figure 1. Constructing the 8-by-2 Connector / 22
Figure 2. Setting Up Equipment for Digital Channel Threshold Accuracy Test / 26
Figure 3. Setting up Equipment for DC Vertical Gain Accuracy Test / 32
Figure 4. Using a Blocking Capacitor to Reduce Noise / 34
Figure 5. Setting up Equipment for Dual Cursor Accuracy Test / 38
Figure 6. Using a Blocking Capacitor to Reduce Noise / 39
Figure 7. Setting Up Equipment for Bandwidth (-3 dB) Verification Test / 41
Figure 8. Setting Up Equipment for Internal Trigger Sensitivity Test / 48
Figure 9. Setting Up Equipment for 4-Channel External Trigger Sensitivity
Figure 10. User Calibration cable for 2-channel oscilloscope / 60
Figure 11. User Calibration cable for 4-channel oscilloscope / 60
Figure 12. Default setup screen / 68
Figure 13. Example pulses / 70
Figure 14. Exploded View / 76
2000/3000 X-Series Oscilloscopes Service Guide
Test / 51
9