Environmental Conditions - Keysight Technologies InfiniiVision 2000 Service Manual

1
Characteristics and Specifications

Environmental Conditions

Environment
Ambient
temperature
Humidity
Altitude
Overvoltage
Category
Pollution Degree
Pollution Degree
Definitions
Specifications
Please see the InfiniiVision 2000/3000 X-Series Oscilloscopes Data Sheet for
complete, up-to-date specifications and characteristics.
To download a copy of the data sheet please visit:
www.keysight.com/find/2000X-Series
Contact us
To contact Keysight, see:
16
Indoor use only.
° °
Operating 5 C to +55 C; non-operating –40
Operating: Up to 80% RH at or below +40
Non-operating: Up to 95% RH up to +40
Operating and non-operating to 4,000 m (13,123 ft)
This product is intended to be powered by MAINS that comply to Overvoltage
Category II, which is typical of cord-and-plug connected equipment.
The InfiniiVision 2000/3000 X-Series oscilloscopes may be operated in
environments of Pollution Degree 2 (or Pollution Degree 1).
Pollution Degree 1: No pollution or only dry, non-conductive pollution occurs.
The pollution has no influence. Example: A clean room or climate controlled
office environment.
Pollution Degree 2. Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation may occur.
Example: General indoor environment.
Pollution Degree 3: Conductive pollution occurs, or dry, non-conductive
pollution occurs which becomes conductive due to condensation which is
expected. Example: Sheltered outdoor environment.
www.keysight.com/find/contactus
°
C to +71
°
C. Up to 45% RH up to +50
°
C. Up to 45% RH up to +50
or www.keysight.com/find/3000X-Series.
2000/3000 X-Series Oscilloscopes Service Guide
°
C
°
C.
°
C.