Table of Contents
Advertisement
7
PARAMETER SETTING MODE
In 5Tone signaling mode,press
displays "AN---",turn Main Dial to select desired digit(caller ID).In
this mode, press
next, press
to forward cursor. After editing, press
operate ANI call.
4.
Press
key to confirm and exit.
Sending 2-Tone Call
1.
Press and hold
2.
P r e s s
/
k e y t o c h o o s e
No.03 menu, LCD displays "2TON
XX","XX"indicates the preprogrammed
groups.
3.
Turn Main Dial to select the desired
2-TONE group, Press PTT to transmit selected group.
17
4.
Total:32groups,00-31, Default: 00.
5.
Press
key to confirm and exit.
2-TONE will be operation parameters must be edited by
programming software prior to the practical operation.
This function is to only query edited group or name.
Sending 5-Tone Call
1.
Press and hold
key for over 2 seconds to enter setting menu.
2.
Press
/
key to choose No.04 menu,
LCD displays "5TON XX","XX"indicates the
preprogrammed groups.
for 2 seconds until LCD
to confirm existing digit and move cursor to
key for over 2 seconds to enter setting menu.
3.
Turn Main Dial to select the desired 5-TONE group, Press [
transmit selected group.
4.
Total:100groups,00-99,Default:00.
key to
5.
Press
5-TONE operation parameters must be edited by programming
software prior to the practical operation.
Sending DTMF call
1.
Press and hold
2.
Press
/
XX", "XX" indicates the operation parameters must be.
3.
Turn Main Dial to select the desired
DTMF group,Press PTT to transmit
selected group.
4.
Total:16groups,00-16,Default:00.
5.
Press
key to confirm and exit.
Signaling Combination setup
This function is to improve the level of protecting the radio against
receiving irrelative signal.
1.
Press and hold
seconds to enter setting menu.
2.
Press
menu, LCD displays "SPK--SQ".
3.
Turn Main Dial to select the desired
combination.
key to confirm and exit.
key for over 2 seconds to enter setting menu.
key to choose No.05 menu, LCD displays "DTMF
key for over 2
/
key to choose No.06
PTT] to
Advertisement
Table of Contents
