7
PARAMETER SETTING MODE
In 5Tone signaling mode, press
displays "AN---", turn Main Dial to select desired digit(caller ID).
In this mode, press
to next, press
to forward cursor. After editing, press
to operate ANI call.
4.
Press
key to confirm and exit.
Sending 2-Tone Call
1.
Press and hold
2.
Press
/
key to choose No.03
menu, LCD displays "2TON xx", "XX"
indicates the preprogrammed groups.
3.
Turn Main Dial to select the desired
2-TONE group, Press PTT to transmit
selected group.
17
4.
Total:32groups, 00-31, Default: 00.
5.
Press
key to confirm and exit.
2-TONE will be operation parameters must be edited by
programming software prior to the practical operation.
This function is to only query edited group or name.
Sending 5-Tone Call
1.
Press and hold
key for over 2 seconds to enter setting menu.
2.
Press
/
key to choose No.04 menu,
LCD displays "5TON xx", "XX" indicates
the preprogrammed groups.
for 2 seconds until LCD
to confirm existing digit and move cursor
key for over 2 seconds to enter setting menu.
3.
Turn Main Dial to select the desired 5-TONE group, Press [
transmit selected group.
4.
Total:100groups, 00-99, Default:00.
key
5.
Press
key to confirm and exit.
5-TONE operation parameters must be edited by programming
software prior to the practical operation.
Sending DTMF call
1.
Press and hold
2.
Press
/
xx", "xx" indicates the operation parameters must be.
3.
Turn Main Dial to select the desired
DTMF group, Press PTT to transmit
selected group.
4.
Total:16groups, 00-16, Default:00.
5.
Press
key to confirm and exit.
Signaling Combination setup
This function is to improve the level of protecting the radio against
receiving irrelative signal.
1.
Press and hold
seconds to enter setting menu.
2.
Press
/
menu, LCD displays "SPK--SQ".
3.
Turn Main Dial to select the desired
combination.
key for over 2 seconds to enter setting menu.
key to choose No.05 menu, LCD displays "DTMF
key for over 2
key to choose No.06
PTT] to