Furuno FS-5075 Operator's Manual page 96

7. NBDP SYSTEM OVERVIEW
Window Color
Self Test: Start diagnostic test.
Function key [F7]: WRU (Who Are You?): In the ARQ mode, request other station's
answerback code.
Function key [F8]: HR (Here Is): In the ARQ mode, send your ship's answerback code.
Function key [F9]: OVER: In the ARQ mode, switch the direction of traffic; the information
receiving station becomes the information sending station, the information sending station
becomes the information receiving station.
Function key [F10]: Break: Disconnect the line.
7-10
Select display colors. To change display colors:
1. Select Change from Setup.
2. Press the ↓ key to select Window Color and then press the
Enter key.
Window Color Change
Window Color Setup
Default Color
To Change: ENTER To quit: ESC
3. The cursor is selecting Window Color Setup; press the Enter
key.
Window Color Setup
Window : [BASE WINDOW ]
Fore Color : [L-WHITE
Back Color : [BLUE
To Change: ENTER To Change Value: L<=>R
4. Press the → key to select the item to change: BASE WINDOW,
BACK SCROLL, EDIT 1-2, FUNCTION, SUB MENU 1-3,
MESSAGE.
5. Press the ↓ key to select Fore Color.
6. Press the → key to select color: L-WHITE, BLACK, BLUE,
GREEN, CYAN, RED, MAGENTA, BROWN, WHITE, GRAY,
L-BLUE, L-GREEN, L-CYAN, L-RED, L-MAGENTA, YELLOW.
7. Press the ↓ key to select Back Color.
8. Press the → key to select color.
9. Press the ↑ key to select Window.
10. Repeat the step 4 to 9 to set other colors.
11. Press the Enter key followed by the Esc key.
]
]