Creating Dsc Messages With Quoting Registered Address - Furuno FS-5075 Operator's Manual

6. MENU OPERATION
6.13.5

Creating DSC messages with quoting registered address

1. Rotate the ENTER knob to select the address, which you want to quote, on the
ADDRESS BOOK screen.
2. Press the OTHER DSC MSG key to open the COMPOSE MSG screen.
6.14 Preparing TX Message
For the individual, PSTN, group and test messages, you can create messages and store
them in the memory for future use. You can edit, send or delete these messages. Maximum
100 messages can be stored into the memory.
6.14.1 List for message files
1. Rotate the ENTER knob to select DSC on the MENU screen and then press the ENTER
knob.
2. Rotate the ENTER knob to select MSG FILE and then press the ENTER knob.
Key/knob
ENTER Move the cursor position with rotating the ENTER knob.
CANCEL Return to the MENU screen.
1 Go to the previous page.
3 Go to the next page.
4 Delete messages (see paragraph 6.14.8).
5 Open the MESSAGE FILE ENTRY screen.
6 Switch the message type. Each press changes the type continuously
(INDIVIDUAL → GROUP → PSTN → TEST →INDIVIDUAL → ...).
6-14
Press the
OTHER DSC
MSG key.
LIST
Function
LIST