Copying And Pasting Text - Furuno FS-5075 Operator's Manual

9. NBDP FILE OPERATIONS
Pasting text
To paste the cut text to a new location, do the following:
1. Place the cursor at the exact spot in the message where the cut text is to start.
2. Press the function key F2 and then the 4 key, or the Ins key.
9.4.2

Copying and pasting text

You can copy a portion of text and paste it elsewhere.
1. Select the text to copy. (See "Cutting text" above for the procedure.)
2. Press the function key F2 and then the 3 key. The text selected is copied to the paste
buffer memory where the cut or copied text is stored. The screen returns to the normal
screen.
3. Place the cursor at the exact spot in the message where the copied text is to start.
4. Press the function key F2 and then the 4 key.
9.4.3 Select all
The Select All feature lets you select all of the file currently displayed. This feature can be
useful when you want to combine the files. The procedure below explains how to place the
file loaded in working area 1 onto the end of the file loaded in working area 2.
1. Load the file to be copied from a floppy disk in working area 1.
2. Press the function key F2 and then the 5 key. The entire file appears in inverse video.
3. Press the function key F2 and then the 3 key. The file is placed in the paste buffer
memory.
4. Load the file to be combined in working area 2.
5. Place the cursor at the exact spot in the message where the text now in the paste buffer
memory is to start and press the Ins key.
Floppy Disk
9-4
Working
Area 1
Open
1
file
Open
3
file
Working
Area 2
4
Paste (Combine)
Copy and paste flow diagram
Paste
2
Buffer
Transfer
Memory
(copy)
Holds cut or
copied text