Furuno FS-5075 Operator's Manual page 116

10. NBDP TRANSMITTING, RECEIVING
[A:\TEST1.
File name
LOG File
TEST1.
TEST2.
TEST3.
NBDP
[
4 Files exist
To select : ENTER
Sending volume (percentage of message transmitted, counts upward as the message is
being transmitted), ARQ error count and ARQ transmission time appear on the screen.
"Lock" appears in reverse video when the mark and space signals in the receive signal are
normal. "ARQ Error" shows the number of times error was found during transmission. "ARQ
Time" is the time in seconds the communication line has been established.
1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
Station Name :
Frequency (T/R) :
Comm Status :
Sending Volume :
6. After the message is transmitted, press the function key F10 (Break) to disconnect the
line.
Type a message from the keyboard
1. After exchanging answerback code by the function key F7 (WRU) and F8 (HR), type
your message directly from the keyboard.
2. To change the direction of traffic, press the function key F9 (Over), or +, ? in order. Then,
the other station becomes the information sending station, your station becomes the
information receiving station. Receive a message from the sending station.
3. After completion of communication, press the function key F7 (WRU) to receive the
answerback code of the other station and
4. Press the function key F8 (HR) to transmit your own answerback code.
5. Press the function key F10 (Break) to disconnect the line.
Stopping transmission
1. Press the function key F3 and then the 4 key. The message "Send Canceled" appears
on the screen. Transmission is stopped but the line is still connected.
2. To disconnect the line, press the F10 (Break) key.
10-4
Send File
Size
52
120
151
180
169
End of Directory
To view : SPACE
Send File window
8765.00 / 8965.00(kHz)
Connect Send Lock
100(%) ARQ Error : 0
Communication status screen
]
Date & Time
02-10-15 17:25
02-10-10 16:30
02-10-11 09:25
02-10-11 20:16
02-10-12 06:23
1454000 bytes free
To quit : ESC
2002-09-08 2:14:28 UTC
HT
Comm Mode :ARQ
Error
ARQ Time : 0(sec)
]
Caps-Eng