Furuno FM3000 Operations And Information Quick Manual
  1. Manuals
  2. Brands
  3. Furuno Manuals
  4. Radio
  5. FM-3000
  6. Operations and information quick manual
Furuno FM3000 Operations And Information Quick Manual

Furuno FM3000 Operations And Information Quick Manual

Hide thumbs Also See for FM3000:
1
2

Advertisement

Table of Contents

FM3000 VHF Radio Operations and Information Quick Guide
Specifications: 13.8VDC +/- 15% @ 5.5A max (TX), Output power:25W (High) or 1W (low), Audio power:4.5W @4 ohm load

Notes and troubleshooting:

Intercom mode: Inhibits transmit (TX) and receive (RX) functions
Microphone Lock Function: Press and hold the [16/9] key on the microphone, turn power "ON" to toggle the lock function on or off.
No speaker sound: Internal speaker may be turned "off", use the Set Mode (see page 2) to turn "on".
Sensitivity is low: The attenuator may be activated, Press [LO/DX] to turn the function "off".
No Transmit or high power: Some channels are for low power or receive only, change channels and/or press [HI/LO] for high power.
Scan does not start: "TAG" channel is not programmed; set desired "TAG" channels (see page 12 of the operators manual).
Distress call will not transmit: MMSI (Maritime Mobile Service Identity) code is not programmed (see operator manual page 13).
FM3000 VHF Radio Operations and Information Quick Guide
GP
Page 1
11/18/2004

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FM3000 and is the answer not in the manual?

Questions and answers

Related Manuals for Furuno FM3000

Summary of Contents for Furuno FM3000

  • Page 1 FM3000 VHF Radio Operations and Information Quick Guide Specifications: 13.8VDC +/- 15% @ 5.5A max (TX), Output power:25W (High) or 1W (low), Audio power:4.5W @4 ohm load Notes and troubleshooting: Intercom mode: Inhibits transmit (TX) and receive (RX) functions Microphone Lock Function: Press and hold the [16/9] key on the microphone, turn power “ON” to toggle the lock function on or off.
  • Page 2 Set Mode Programming: Press and hold [16/9] key and power “ON”. After display appears release [16/9] key. Press [16/9] key to select item, rotate [CHANNEL] knob to select condition. Power “OFF” then “ON” to exit Set mode. FM3000 VHF Radio Operations and Information Quick Guide Page 2...

Table of Contents