Maintenance & Troubleshooting - Furuno FS-5075 Operator's Manual

11. MAINTENANCE &
TROUBLESHOOTING
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
11.1 Test
Do the following to check the radiotelephone for proper operation.
Daily test
1. Rotate the ENTER knob to select TEST on the MENU screen and then press the
ENTER knob.
2. DAILY TEST is selected; press the ENTER knob to start the test. After completing the
test, the audio alarm sounds and the following screen appears. The program version
number appears. Also, OK or NG (No Good) appears as the test result for RX and WR1
(2). For NG, contact your dealer for advice.
To print out the test result, press the 4 key. When the setting of DAILY TEST on PRINT in the
SYSTEM menu is AUTO, the test result is printed out automatically (see section 6.6).
NOTICE
Do not apply paint, anti-corrosive sealant
or contact spray to plastic parts or
equipment coating.
Those items contain products that can
damage plastic parts and equipment coating.
11-1