Furuno FS-5075 Operator's Manual page 135

4. Press the Enter key. The results of the self test are displayed a short time later.
Terminal Unit Test : ver. X.XX
Main Unit Test
Modem Unit Test
Radio Unit Test
DSC Unit Test
Printer Unit Test* :
X.XX = Version No.
*: "NG" and "Printer not ready" when printer is off or is abnormal.
Self test results
The test results are shown as OK or NG (No Good). For any NG, try the self test again. If it
appears again, call for service. When the test is completed, the message "Selftest
Completed. Press any key to escape." appears.
Tone test
1. Select Self Test from the System menu.
2. While pressing and holding down the Shift key, press the ↓ key to open the Tone Test
menu.
3. Select a test and then press the Enter key.
4. You can stop a tone test at anytime by pressing the Esc key.
Selftest
: ver. XX
: ver. XX
: ID FS5070
: ID FS5070
Print all character
Tone Test
1: Tone Test 1 (All Char)
2: Tone Test 2 (Fox)
3: Tone Test 3 (Beta)
4: Tone Test 4 (Mark)
5: Tone Test 5 (Space)
6: Tone Test 6 (BY)
11. MAINTENANCE & TROUBLESHOOTING
IB-583/IB-585
:OK
Main terminal soft (T-CPU board)
:OK
NBDP modem
:OK
:OK
:OK
:OK
11-7