Data Management - Dräger X-dock 5300 Technical Manual

6.5

Data management

NOTICE
i
i
All entries are stored in UTC time (Universal Time
Coordinated).
6.5.1 Managing user profiles
User profiles can be created, edited or deleted in this menu.
 Select > Data management > Users.
The user profiles will be displayed.
For detailed information see chapter 4.6 on page 10.
6.5.2 Export Station event logger
The saved data of the event memory can be saved to a
connected USB storage device with this function.
To copy data from the event memory to a USB data storage
device:
1. Connect USB data storage device to the USB port of the
station.
The USB icon is displayed in the status bar.
2. Select > Data management > Station event logger.
The event memory is displayed.
3. Select the required files from the list.
4. Acknowledge selection with OK.
The selected files are copied onto the USB data storage
device.
6.5.3 Export data memory
The saved data of the data memory can be saved to a
connected USB storage device with this function.
To copy data from the data memory to a USB data storage
device:
1. Connect USB data storage device to the USB port of the
station.
The USB icon is displayed in the status bar.
2. Select > Data management > Export data logger.
The data memory is displayed.
3. Select the required files from the list.
4. Acknowledge selection with OK.
The selected files are copied onto the USB data storage
device.
6.5.4 Export certificates
This function can be used to save the stored certificates to a
connected USB storage device.
To copy certificates to a USB data storage device:
1. Connect USB data storage device to the USB port of the
station.
The USB icon is displayed in the status bar.
2. Select > Data management > Export certificates.
The event memory is displayed.
3. Select the required certificates from the list.
4. Acknowledge selection with OK.
The selected certificates are copied onto the USB data
storage device.
Dräger X-dock 5300/6300/6600
6.5.5 Mobile synchronization
This function can be used to copy the local database, reports,
certificates and device data loggers to a connected USB
storage device or the internal MSD area. This is useful if the
data cannot be exchanged via the network connection. The
data can then be imported via the X-dock Manager (see X-
dock Manager Online Help).
1. If necessary, connect the USB storage device to the USB
port on the station.
2. Select > Data
synchronization.
The available target locations are displayed.
3. Select desired target location.
4. Confirm the selection with OK.
The data is copied to the target location.
NOTICE
i i
Dräger recommends cleaning the local data after
successfully importing the data into the database (see
chapter 6.4.4 on page 20).
Dräger recommends exporting the local data on a
regular basis to keep the amount of data to be
exported, and thus copied, small.
The export via the MSD area is faster than via a USB
storage device.
6.5.6 Activate or deactivate MSD mode..
Use this feature to use the station as USB data storage device.
Data saved on the station can be copied to a connected PC.
To activate MSD mode:
1. Connect PC via USB mini B cable with the X-dock.
2. Select > Data management > MSD mode.
3. Activate MSD mode.
4. Acknowledge settings with OK.
The station will be displayed as a drive on the PC.
NOTICE
i i
While the MSD mode is activated, no other actions can
be performed on the station.
To deactivate MSD mode:
 Cancel MSD mode with X.
The station is ready to roll.
6.5.7 Import configuration template
To import a configuration template to the station from a USB
memory stick:
1. Create a configuration template with the aid of the CC-
Vision PC software.
2. Transfer the template file to a USB memory stick.
3. Insert the USB memory stick into the USB port on the
station.
4. Select > Data management > Device configuration.
Menu
management > Mobile
21