Manage Tests - Dräger X-dock 5300 Technical Manual

Basics
4.9

Manage tests

 Select > Define test.
The test overview will be displayed.
Select
►
test mode
►
Select test 1
►
Select test 2
►
Select test 3
4.9.1 Selecting the test mode
The following test modes are available. The test modes define
the behaviour of the system when the user is logged off. The
test mode Test scheduler can be configured.
Mode
Favorites The Favorites mode displays the predefined tests.
mode These can be selected via the favourites bar.
Single mode In Single mode, a predefined test is started by
closing the module flap. Several tests can be
started and executed in parallel.
Test The Test scheduler enables the user to
scheduler configure the time and weekday when a
predefined test should be performed. To
configure the Test scheduler mode, select
Manual tests can only be started when the user
is logged in.
To select the test mode:
1. Select .
2. Select desired test mode.
3. If necessary, select
possible with the Test scheduler test mode).
4. If necessary, edit tests (see chapter 4.9.2 on page 14).
5. Save settings with OK.
14
Configure
◄
test mode
◄ Edit test 1
◄ Edit test 2
◄ Edit test 3
Description
of the test mode to be edited (only
4.9.2 Creating or editing a test
NOTICE
i i
A maximum of 3 favourites may be created.
The first 3 characters of the test name are displayed in
the list of favourites.
To create or edit a test:
1. Select the symbol
The editing window is displayed.
Enter test name
Select gas test
Select permission level
Options
Further options
2. Enter desired test name.
3. Select the desired gas test.
The following gas tests are available:
Tests with measured gas
-
.
Quick bump test
Extended bump test Test for reaching cylinder
Calibration
of the test to be edited.
►
►
►
►
►
No gas test, only the activated
options are run.
Test threshold override test
(if test gas = measured gas,
concentration A1; see chapter 7. on
page 15).
concentration within a tolerance
range (see chapter 7. on page 15).
Zero point and sensitivity
adjustment
Dräger X-dock 5300/6300/6600