Managing User Profiles - Dräger X-dock 5300 Technical Manual

Basics
4.6

Managing user profiles

 Select > Data management > Users.
The user overview will be displayed.
Created user
To create a new user profile:
1. Select > Data management > Users > New.
The input form will be displayed.
Enter last name
Enter first name
Enter User ID
Enter permission level and password
Enter company name
Enter location
Enter comments
2. The following information must be created:
User name

User ID

Permission level (see chapter 7 on page 23)

Password

3. The following information can optionally be given:
Company name

Location

Comments

4. Save the new user profile with OK.
NOTICE
i i
User profiles can only be created by the administrator
or by users with authorisation level 5.
10
►
►
►
►
►
►
►
►
To edit an existing user profile:
1. Select > Data management > Users.
The user profiles will be displayed.
2. Select the user profile.
3. Select Edit.
4. Edit the desired settings.
5. Confirm the new settings with OK.
4.7 Configuring the test gas inlet
WARNING
!
The gas concentrations entered must be identical to
the specifications on the gas cylinder used. Incorrect
details will result in faulty measurement results.
NOTICE
i i
When the test gas concentration is changed, the
corresponding test gas inlet must be reconfigured.
To configure a test gas inlet:
1. Select > Gas configuration.
An overview of the test gas connections is displayed.
Select the test gas inlet
2. Select desired test gas inlet.
The configuration menu will appear.
Select the
►
test gas inlet
►
Enter part no.
Enter
►
use-by date
►
Select test gas
►
Enter
concentration
►
Further options
►
◄ Enter batch no.
Create Test gas
◄
component
◄ Delete
configuration
◄ Select
unit
Dräger X-dock 5300/6300/6600