Checking Connections - EMS HSD series User Manual

Checking connections

System failures are often the result of incorrect, damaged,
or disconnected cables and wiring.
Make sure that the following connections are made:
Resetting the system
If a number of call or connection attempts are unsuccessful,
the system may need resetting.
To reset the HSD Transceiver:
This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be
used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to
any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.
•
Computer cables to the terminal adapter or router
are all connected properly
•
Connection to the HSD Transceiver is confirmed
•
All external devices (fax, telephones, computers)
are connected properly
•
Press the reset button on the front panel of the
HSD Transceiver or the remote cabin reset
button (if installed).
The HSD Transceiver will automatically reset and
log-on to the LES.
CONFIDENTIALITY STATEMENT
Copyright © EMS Technologies Canada, Ltd.
User's Guide EMS-MN-1110-10048
77