Connecting To The Internet - EMS HSD series User Manual

HSD Aeronautical Transceivers

Connecting to the Internet

This section provides basic instructions on how to connect
to the Internet.
If you have not set-up a new dial-up networking
connection, go to Chapter 2, Getting started and follow
the instructions provided.
How to access your dial-up connections varies depending
upon which operating system and computer hardware you
are using. Consult your operating system's help or user
manual for specific instructions.
The following procedures provide general instructions on
how to connect to the Internet using the HSD Transceiver.
The example provided uses Windows 98 for illustration
purposes only. Performance between operating systems
varies.
At the time of printing, Windows 2000 is the best
performer of Microsoft operating systems for use over
the satellite communications network.
To connect to the Internet:
1. Open the Dial-up Networking window.
2. Double click on the connection you created for
This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be
used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to
any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.
48
connecting to the Internet called HSD Web Access.
The Connect To window appears.
CONFIDENTIALITY STATEMENT
Copyright © EMS Technologies Canada, Ltd.