EMS HSD series User Manual page 62

HSD Aeronautical Transceivers
To "get" files from the target computer:
To "put" files on the target computer:
This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be
used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to
any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.
54
•
In the MS-DOS window, type get filename, and
then press ENTER.
The file will now begin to transfer. When the transfer is
completed, open the file as usual.
•
In the MS-DOS window, type put filename, and
then press ENTER.
The file will now begin to transfer. When the transfer is
completed, open the file as usual.
Important: If you are finished transferring
files, be sure to disconnect. Charges
continue to apply on open connections.
CONFIDENTIALITY STATEMENT
Copyright © EMS Technologies Canada, Ltd.