Table of Contents
Advertisement
3. In the protocol field, select Multilink PPP.
4. When prompted, select yes to save the profile and
5. Using the AT@ MENU command, confirm the
This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be
used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to
any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.
The protocol filed now shows Multilink PPP as the
selected protocol.
then reboot.
settings are correct.
The Diva T/A is now configured to place bonded
Multilink calls.
CONFIDENTIALITY STATEMENT
Copyright © EMS Technologies Canada, Ltd.
User's Guide EMS-MN-1110-10048
29
Advertisement
Table of Contents
Troubleshooting
