Making A Terminal To Terminal Connection - EMS HSD series User Manual

HSD Aeronautical Transceivers

Making a terminal to terminal connection

Using FTP, you can establish a connection between remote
terminals (computers).
Accessing remote files
Using the HSD Transceiver, you are able to upload (get)
and download (put) files from remote computers.
To transfer files from a remote terminal using
FTP:
1. Establish a connection to the remote server.
2. Check that the connection is established—ping the
3. Open the command window.
For example, in Windows 98:
This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be
used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to
any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.
52
remote computer you are dialing. If the connection is
established, you will receive a reply.
•
Click Start Run Type in command, and then
click OK.
CONFIDENTIALITY STATEMENT
Copyright © EMS Technologies Canada, Ltd.