Verifying The Log-On Status Hsd Transceivers - EMS HSD series User Manual

HSD Aeronautical Transceivers

Verifying the log-on status HSD transceivers

Table 5 System log-on status tones
Tone heard
Busy tone
Two beeps
repeated
High-pitched
tone
If you continue to experience difficulties completing your
call, contact the LES operator for assistance (no charges
apply).
To contact the LES operator for assistance—dial 33#.
This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be
used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to
any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.
76
•
Press
•
Dial 11
•
Press #
You hear one of three different tones: a busy tone, two
beeps repeated, or a high-pitched tone. Table 5
provides an explanation of what each tone implies.
Log-on Status
•
•
•
CONFIDENTIALITY STATEMENT
Copyright © EMS Technologies Canada, Ltd.
The HSD
Transceiver is
'busy'. It may
be acquiring a
satellite or LES,
or logging-on
The HSD
Transceiver is
waiting for
further
commands
after acquiring
a satellite and
LES
System logged-
on and ready to
use
Action
• Wait for the
system to 'clear
down' and then
try your call
again
•
Wait for the
system to be
ready and then
try your call
again
• Place your calls