EMS HSD series User Manual page 14

HSD Aeronautical Transceivers
CO-OPERATIVE mode:
In Co-operative mode, the HSD transceiver operates with
an AERO H/H+ system. The HSD hardware is installed in
the AERO H/H+ HPA equipment position.
A communications link, between the AERO H/H+ system
and the HSD system, coordinates the use of the HPA.
This mode provides one or two channels of Swift64 data
and allows AERO H/H+ calls. (Swift64 and AERO H/H+
calls can be placed at the same time—providing there is
sufficient HPA power available.)
Features:
Supported services:
* Available via an optional service bulletin
This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be
used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to
any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.
6
At time of printing, systems do not operate in
this mode.
If one or more Swift64 calls are in process
and an AERO H/H+ call is attempted (either
incoming or outgoing), the AERO H/H+ call
is allowed to proceed if there is sufficient
HPA power available to process all of the
calls.
If any AERO H/H+ calls are in process,
Swift64 calls are allowed—providing that
there is sufficient HPA power available to
process both the high-speed data and AERO
H/H+ calls.
•
Configures to operate as either a single or dual
channel system
•
Bi-directional data throughput for sending and
receiving e-mail, surfing the Web, video
conferencing, and connecting to internal
intranets and Bulletin Board Systems (BBS)
•
ISDN interface
•
Voice and fax transmission (with terminal
adapter or ISDN Phone)
•
Swift 64 high-speed data service
•
Ethernet and Mobile Packet Data (future
availability*)
CONFIDENTIALITY STATEMENT
Copyright © EMS Technologies Canada, Ltd.