EMS HSD series User Manual page 45

4. Make sure that the telephone number displayed
5. Do not Use Area code and Dialing Properties. If it
6. Click the Server Types tab.
7. Select PPP: Internet, Windows NT Server,
8. Click TCP/IP Settings.
This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be
used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to
any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.
is 28#.
is checked, clear it.
The Server Types tab sheet appears.
Windows 98 (or PPP: Windows 95/98/NT4/2000,
Internet for other versions of Windows) as the Type
of Dial-up Server, and then check the following:
Log on to network
Enable Software compression
TCP/IP
CONFIDENTIALITY STATEMENT
Copyright © EMS Technologies Canada, Ltd.
User's Guide EMS-MN-1110-10048
37