Check-line CTM2 Instruction Manual page 29

ChPwd
Press this key and you are prompted to enter a new password to access the
configuration menus. Use the softkeys to scroll in a new password and press the Enter
softkey to accept it.
Default password is 0. If a new password is lost or forgotten, contact your Dillon
distributor.
Reset
Press this key and you are asked if you wish to reset the system. Press the Yes softkey
only if you want to reset the unit to factory default configuration. Press the No softkey
to abort this and return to the previous screen.
Quick-Check Red User Instructions
Fixed - The unit will shutdown after the set number of minutes no matter
l
what happens.
No Load - The unit will shutdown after the set number of minutes only if
l
there is no load on the unit. This prevents shutdown in the middle of line
tensioning.
No Change - The unit will shutdown if there has been no keypad activity or
l
change in tension after the set number of minutes.
29