Advertisement
CHECK
LINE
®
•
BY ELECTROMATIC
DX2/DXX
Operating Instructions
Also applies to Special Purpose Models: FX, FX2,
Distributed by: ABQ Industrial LP USA
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
Web: https://www.abqindustrial.net E-mail: info@abqindustrial.net
RX/BX, RX2/BX2, DXFT, DX2FT, TX, TX2, KXB
Advertisement
Table of Contents
Related Manuals for Check-line DX2/DXX
Summary of Contents for Check-line DX2/DXX
- Page 1 CHECK LINE ® • BY ELECTROMATIC DX2/DXX Operating Instructions Also applies to Special Purpose Models: FX, FX2, Distributed by: ABQ Industrial LP USA Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451 Web: https://www.abqindustrial.net E-mail: info@abqindustrial.net RX/BX, RX2/BX2, DXFT, DX2FT, TX, TX2, KXB...
-
Page 2: Table Of Contents
7.0 DX2 MODEL DATA & SPECIFICATIONS* CONTENTS Accuracy** ± 1% of full scale or ........Page ±... -
Page 3: Overview & Operating Principle
1.0 OVERVIEW & OPERATING PRINCIPLE 6.3 Air Dashpot Damping DX2 and DXX Tension Meters incorporate a moderate DX2 and DXX Tension Meters are hand-held, mechani- amount of movement damping to smooth out some cal instruments which accurately measure the running high frequency tension fluctuation. -
Page 4: Operating Elements
6.0 OPTIONS 2.0 OPERATING ELEMENTS 6.1 High-Speed Guide Rollers DX2 and DXX guide roller assemblies are rated 2000 meters/min., maximum. The following high-speed roller assemblies are optionally available: “K” Roller Assembly : 3,000 meters/min., maximum “U” or “DHS” Assembly : 5,000 meters/min., maximum All high speed roller assemblies must be initially installed by the factory or an authorized service facility. -
Page 5: Thickness Compensation
3.0 THICKNESS COMPENSATION 5.4 Calibration Verification Schedule Frequency of calibration accuracy verification depends The 3-roller system for on many factors. These include frequency and extent tension measurement relies of tension overloads, operating speeds, length of oper- on the displacement of the ating times, environment, care in handling, etc. -
Page 6: Quick Start Instructions
5.2 Special Calibration 4.0 QUICK START INSTRUCTIONS Special Calibration is optionally available for a specific NOTE: If tension meter is equipped with a Thickness material type and size so long as the material fits the Compensator, first set up Compensator as indicated in mechanical limits and range of the instrument. - Page 7 5.0 CALIBRATION NOTES 5.1 Calibration with Factory Standard Filaments All DX2 and DXX Tension Meters are calibrated with The calibration process laboratory weights suspended from factory Standard involves hanging laboratory nylon monofilament sizes, as noted in the table below. weights from a fixed point, Any difference in process material size and rigidity engaging the vertical line from the Standard materials may result in some error.
- Page 8 APPENDIX — DX2 SPECIAL-PURPOSE MODELS Essentially, all DX2 Special Purpose models operate in a manner similar to the standard Type DX2. In addition, however, they offer special rollers and head configurations for specific applications. Optic Fibers — FX2 Limited Access — DX2F Tapes —...
Need help?
Do you have a question about the DX2/DXX and is the answer not in the manual?
Questions and answers