Table of Contents
Advertisement
ID:
An operater can key in either a User ID number or a Lift ID assigned to a particular
product. This is a numeric number only and can be any number from 1 to 65,000. (if
you want to turn the ID off, key in 0).
Note: ID not used in Multi Leg/Wire mode.
Send:
This will export/send the Log information out the configured port.
Clear:
This will clear any data in the Log mode. Clearing "On Lift", "Timed", "Overload" and
Multi Leg/Wire stored data.
Auto-off can preserve battery life.
22
The data will be exported to a computer via RS-232. Dillon
recommends using "WedgeLink" software as a keyboard wedge.
The data needs to be comma delimited and can be exported to an
Excel spreadsheet. Refer to Figure
Figure 3.6 Example of Tower Data
3.6
for an example.
Quick-Check Red User Instructions
Advertisement
Table of Contents
Need help?
Do you have a question about the CTM2 and is the answer not in the manual?
Questions and answers