Printronix T4204 User Manual page 75

Solution #2: The user sets Auto Label Width to 2 inches, configures the Num
Auto Labels to 3, and enables the Auto Label Mapping feature.
Printer Operation for Solution #2: The printer will print the first 2 inch label
by itself, the second 2 inch label by itself, and finally, the last 2 inch label by
itself.
Label
Label
1
2
Example 3: Blank Label Case
Problem: A file exists with two horizontally adjacent 4 inch labels. The user
now desires to use this file with a printer that has a 4 inch physical width. The
user decides to set the Num Labels to 3 and the Label Width to 4 inches
despite the fact that these values are not optimum.
Printer Operation: The maximum Num Auto Labels = (47 inches/4 inches) =
11. The selected value of 3 is legal. After the file is sent, the printer will begin
by printing the first 4 inch width label. Once that label is complete, it will print
the second 4 inch width label. Finally, once both of those labels have been
printed, the printer will print a blank 4 inch label.
File Contents:
Label
Label
1
Label
3
2
MAINT / MISC Menu
Label
1
Label
2
Label
3
Print Output:
Label
1
Label
2
Blank
Label
75