5. Press the FEED key with the printhead closed, as needed, to supply more
label stock or liner.
6. If a label is on the end of the label liner, remove it.
7. Thread the liner around the label rewinder spindle counter-clockwise, as
shown. Slide the label rewind clip over the label liner end and onto the
label rewinder spindle.
Legend:
1)
Label Rewinder Spindle
2)
Label Liner
8. Fold the label liner over the clip to the back of the printer. This helps lock
in the liner.
1
Legend:
1)
Label Rewind Clip
2
1
45