Error Messages - Canon DP-V2411 Instruction Manual

Error Messages

104
Calibration
Network
Various settings,
CDL export
LUT, Various settings,
CDL import
Message
Failed to initialize the external sensor.
Calibration error.
Calibration is completed.
(Brightness setting is lower than target brightness.)
Failed to detect the external sensor.
Please check the connection with the sensor.
Communication error.
Invalid IP Address.
Invalid Subnet Mask.
The USB memory is full.
Failed to write file.
(LUT Import) "LUT Type" is different.
(CDL Import) "File Type" is different.
Failed to read file.
Failed to import.
No import file.
Description and Action
See CA-310 and CA-210 instruction manual.
• Check the installation and connection of the
external sensor and retry (
• Perform matrix calibration of CA-310 and CA-210
( 25).
Set the [Luminance] in calibration again (
Correctly connect the external sensor to the USB
port of this main unit.
IP address may be in conflict or there may be a
network communication error. Check the network
environment.
Enter the correct IP address.
Enter the correct subnet mask.
Use another USB memory or delete the content of
the memory.
The USB memory may be defective or protected.
Check the USB memory.
Select the correct file format.
The USB memory may be defective or protected.
Check the USB memory.
There is an error in the file to be imported. Check the
file.
Check and ensure that the file has been saved to the
USB memory or imported to [User 1] to [User 3].
25).
45).