Table of Contents
Advertisement
Sub Menu
Shape
Line Width
Line Color
Line Brightness
H Position
V Position
1
Area Marker
Enable
H Position
V Position
Width (dot)
Box
Sets the area shape of the safety zone marker.
Brackets
Enclosure
[Box]:
[Brackets]:
[Enclosure]:
Thick
Sets the width of the safety zone marker line.
Normal
Thin
White, Red, Green,
Sets the color of the safety zone marker line.
Blue, Yellow, Cyan,
Magenta
High
Sets the brightness of the safety zone marker line.
Low
-65 to 65 (0)
Adjusts the marker horizontal position with the set aspect and size.
-35 to 35 (0)
Adjusts the marker vertical position with the set aspect and size.
[Area Marker] is used to check a specific area using a rectangular box.
On, Off
Switches the area marker On, Off.
0 to 4086 (240)
Sets the start position (x-coordinate) to draw the rectangle. (in increments
of 2)
0 to 2150 (120)
Sets the start position (y-coordinate) to draw the rectangle. (in increments
of 2)
10 to 4096 (240)
Sets the width of the rectangle. (in increments of 2)
Setting Options (Bold: factory default)
OSD Menu
63
Advertisement
Table of Contents
