Table of Contents
Advertisement
OSD Menu
7
• [Vector Scope] can not be displayed in the following cases:
-
When an image is zoomed in.
-
When [Frame Hold] (for interlaced or PsF signals) is set to [On]
-
When [Peaking] is set to [On]
-
72
During the execution of [Playback File] under [Screen Capture]
-
When [Test Pattern] is displayed.
• When displayed as [Multi View (Quad)] or [Multi View (Dual)], only the signal set in [Marker/TC/WFM/VEC Input] will be displayed.
• When [Vector Scope] is set to [On], [Wave Form Monitor] is set to [Off].
8
[Audio Level Meter] cannot be displayed in the following cases:
-
When [Frame Hold] is [On]
-
During the execution of [Playback File] under [Screen Capture]
-
When [Test Pattern] is displayed
9
• If the power is turned off once and then back on, the test pattern will not be displayed.
• The test pattern will be erased in the following cases:
-
When calibration has been started
-
When the channel is changed using the CH button, F button assigned for Channel UP/Channel DOWN, or [Select Channel] under [Channel
Settings]
-
When changing [Input Configuration] or [Select Input Signal] under [Channel Settings]
-
When [Reset All Settings] is executed
10
When playing back captured images on other DP-V2411 or PC, color may not be played back precisely.
11
• When [CDL/User LUT] is set to [User LUT], [Blue Only] cannot be selected.
• When power is resupplied, [Monochrome], [Blue Only], [Green Off], [Blue Off], and [2020 Out of 709 Gamut View] are set to [Off].
12
This cannot be displayed when [Marker Preset] is [Off].
13
• If the temperature inside the main unit increases while the fan is off, the message [Fan will be rotated as the temperature is high.] is displayed
and the fan starts rotating approximately ten seconds later. Since the temperature of the main unit has increased, the fan rotates faster than
usual.
• The video display's fan may start rotating earlier than the camera because the temperature inside the main unit has increased.
• The fan may not stop in some conditions, for example when used at a high temperature.
Advertisement
Table of Contents
