Canon DP-V2411 Instruction Manual page 64

OSD Menu
Sub Menu
Height (dot)
Mask
64
Line
Line Width
Line Color
Line Brightness
3
Center Marker
Enable
Size
Line Width
Line Color
Line Brightness
3
Grid Marker
Enable
Distance
10 to 2160 (120) Sets the height of the rectangle. (in increments of 2)
Black Switches the mask color (in the marker).
Half
Off
On, Off When [Mask]
Turns On/Off the outlines of the rectangular box.
Thick Sets the width of the area marker line.
Normal
Thin
White, Red, Green, Sets the color of the area marker line.
Blue, Yellow, Cyan,
Magenta
High Sets the brightness of the area marker line.
Low
[Center Marker] shows the center of the image.
On, Off Switches the center marker On, Off.
Large Sets the size of the center marker.
Small
Thick Sets the width of the center marker line.
Normal
Thin
White, Red, Green, Sets the color of the center marker line.
Blue, Yellow, Cyan,
Magenta
High Sets the brightness of the center marker line.
Low
[Grid Marker] is marker used to check the horizontal and vertical position.
On, Off Switches the grid marker On, Off.
160 dots Sets the horizontal and vertical line distance.
240 dots
320 dots
Setting Options (Bold: factory default)
[Black] or [Half]