Canon DP-V2411 Instruction Manual page 41

Video display
Table of Contents

Advertisement

Sub Menu
HDR Range
Canon Log (HDR)
Canon Log 2 (HDR)
Canon Log 3 (HDR)
SMPTE ST 2084 (PQ)
Hybrid Log-Gamma
Hybrid Log-Gamma
RGB
Preset Log 1
Preset Log 2
Gamma LUT 1 to
Gamma LUT 8
 Setting procedures
The explanation uses [SMPTE ST 2084 (PQ)] as an example.
When set at "1000," those areas that exceed 1,000 cd/m
to the dynamic range of the video display. When displaying an image with a PQ of 1,000 cd/m
dynamic range of the image. Also, when displaying an image with a PQ of 2,000 cd/m
2
1,000 cd/m
.
When set at "2000," those areas that exceed 2,000 cd/m
to the dynamic range of the video display. When displaying an image with a PQ of 2,000 cd/m
brightness lowers, you can still check all the dynamic range of the image.
The brightness of the video display corresponds to the value set for Contrast.
SMPTE ST 2084 (PQ): Set to [1000]
SMPTE ST 2084
range
2,000 cd/㎡
1,000 cd/㎡
Sets the display method when Gamma for HDR display is selected.
100 to 800
Sets the [Canon Log] dynamic range to be displayed, from 0 to 800%. (in
100 increments)
100 to 1600
Sets the [Canon Log 2] dynamic range to be displayed, from 0 to 1600%.
(in 100 increments)
100 to 1600
Sets the [Canon Log 3] dynamic range to be displayed, from 0 to 1600%.
(in 100 increments)
100 to 10000 (1000)
Sets the [SMPTE ST 2084 (PQ)] dynamic range to be displayed, from 0.005
to 10,000 cd/m
100 to 1000/2000/4000 Sets how far to display the [Hybrid Log-Gamma] dynamic range.
(in increments of 100)
100 to 1000/2000
The upper limit value will change to match the settings of [Hybrid Log-
Gamma System]. (
100 to 1400 (1000)
Sets how far to display the [Preset Log] dynamic range. (in 100
increments)
100 to 3900 (1000)
512 to 1023
Sets how far to display the 10-bit LUT data dynamic range, from 0 to
1023. (in 1 increments)
SMPTE ST 2084 (PQ) 2,000 cd/m
(Contrast: [10000])
DP-V2411
range
Clip (Saturates gradation.)
1,000 cd/㎡
Brightness value
corresponding to
the contrast setting
Setting Options (Bold: factory default)
2
(nits). (in 100 increments)
45)
2
are clipped, and those that are 1,000 cd/m
2
are clipped, and those that are 2,000 cd/m
2
signal
SMPTE ST 2084 (PQ): Set to [2000]
SMPTE ST 2084
range
Gradation is reproduced by assigning
2,000 cd/㎡
1,000 cd/㎡
2
or below are assigned
2
, you can check the entire
2
, you can check the image up to
2
or below are assigned
2
, although the apparent
DP-V2411
range
the range to the range of the
DP-V2411 (which
lowers the
brightness).
OSD Menu
41

Advertisement

Table of Contents
loading

Table of Contents