Error Messages - Canon dp-v3010 Instruction Manual

Error Messages

Calibration Failed to initialize the external sensor.
Calibration error.
Calibration is completed.
(Brightness setting is lower than target brightness.)
Failed to detect the external sensor.
Please check the connection with the sensor.
Network Communication error.
Invalid IP Address.
Invalid Subnet Mask.
Various settings, The USB memory is full.
CDL export
Failed to write file.
LUT, Various settings, (LUT Import) "LUT Type" is different.
CDL import (CDL Import) "File Type" is different.
Failed to read file.
Failed to Import.
No import file.
Screen Failed to capture.
Capture
Invalid Signal.
Copy protected signal.
Failed to playback file.
Message Description and Action
See CA-310 and CA-210 instruction manual.
• Check the installation and connection of the
external sensor and retry (
• Perform matrix calibration of CA-310 and CA-210
( 32).
Set the "Luminance" in calibration again (
Correctly connect the external sensor to the USB
port of this main unit.
IP address may be in conflict or there may be a
network communication error. Check the network
environment.
Enter the correct IP address.
Enter the correct subnet mask.
Use another USB memory or delete the content of
the memory.
The USB memory may be defective or protected.
Check the USB memory.
Select the correct file format.
The USB memory may be defective or protected.
Check the USB memory.
There is an error in the file to be imported. Check the
file.
Check to see if the file has been imported to the
USB memory.
The USB memory may be defective or protected.
Check the USB memory.
A screen displaying no video is being captured for
example there is no signal or an unsupported signal
is being input. Check the signal, input it again, and
capture it.
The signal you tried to capture may be protected
by HDCP which is a copy prevention standard
for DisplayPort. In this case, the signal cannot be
captured. Check the DisplayPort signal.
The USB memory or the file may be defective or
protected. Check the USB memory or the file.
31).
46).
Error Messages 89