System Settings - Canon DP-V2411 Instruction Manual

System Settings

This menu is used to configure system settings related to the video display.
Sub Menu
Function/Channel Button
Display Function
Display Function (CDL)
Display Channel
CH1
CH2
CH3
Language
Date/Time
Network/IMD/Remote(GPI) Settings
1
Network
Configure an IP
Address
Display
Subnet Mask
In Monitor Display
Control
Position
Manual Display
Type
Sets the function or channel to assign to the F buttons or CH button.
Sets the function to assign to the F buttons of the main unit (
function from the following list (
Sets the channel to assign to the CH button on the display.
CH1 to CH20 (CH1) Select a CH button and register a channel number. A list of settings under
the menu [Channel Settings] (
CH1 to CH20 (CH2)
CH1 to CH20 (CH3)
English Sets the language of the OSD menu and messages.
日本語
简体中文
Sets the year/month/date/hour/minute.
Configures network settings of the video display.
Automatic [Automatic]: Configures an IP address automatically with DHCP/Auto IP.
Manual [Manual]: Configure an IP address and subnet mask manually.
192.168.0.1
255.255.255.0
The video display supports Television Systems Ltd.'s "TSL UMD Protocol Ver. 5.0". You can operate
the video display using an external device connected to the LAN terminal and display characters and
tally lights on the screen. You can input any characters you like directly from this video display. You
can specify the characters using up to 16 alpha-numerical characters and symbols. (
TSL Ver. 5.00 Sets whether or not to receive the control signal from the connected
Manual device.
Off
[Manual]: Select to input the characters on this video display. Does not
Top This sets whether the characters and tally lights will be displayed at the
Bottom top or the bottom.
Automatic [Automatic]: Changes display in accordance with the Input Configuration.
Single [Single]: Single-screen display.
Dual A,B [Dual A,B], [Dual C,D]: Dual-screen display.
Dual C,D [Quad A,B,C,D]: Quadruple-screen display.
Quad A,B,C,D
Setting Options (Bold: factory default)
80).
52) is displayed.
receive a control signal from the connected device.
OSD Menu
29). Select an F button and assign a
33)
75