Error Messages - Canon DP-V2730 Operation Manual

Error Messages
94
Network
Various settings,
CDL export
LUT, Various settings,
CDL import
Screen Capture
Message
Communication error.
Invalid IP Address.
Invalid Subnet Mask.
The USB memory is full.
Failed to write file.
(LUT Import) "LUT Type" is different.
(CDL Import) "File Type" is different.
Failed to read file.
Failed to import.
No import file.
Failed to capture.
Invalid Signal.
Copy protected signal.
Failed to playback file.
No capture file.
Description and Action
IP address may be in conflict or there may be a
network communication error. Check the network
environment.
Enter the correct IP address.
Enter the correct subnet mask.
Use another USB memory or delete the content of
the memory.
The USB memory may be defective or protected.
Check the USB memory.
Select the correct file format.
The USB memory may be defective or protected.
Check the USB memory.
There is an error in the file to be imported. Check the
file.
Check and ensure that the file has been saved to the
USB memory or imported to [User 1] to [User 3].
The USB memory may be defective or protected.
Check the USB memory.
A screen displaying no video is being captured for
example there is no signal or an unsupported signal
is being input. Check the signal, input it again, and
capture it.
The signal you tried to capture may be protected by
HDCP 2.2 which is a copy prevention standard for
HDMI. In this case, the signal cannot be captured.
Check the HDMI signal.
The USB memory or the file may be defective or
protected. Check the USB memory or the file.
Check and ensure that the file has been saved to the
USB memory.